Precautions during decoration construction in wint

2022-07-22
  • Detail

Due to the low temperature in winter, family decoration construction should be paid special attention. Although the construction volume of room decoration is small, it includes conventional types of work such as water, wood, electricity, tile, oil, etc. due to the particularity of the season, the following details should be paid attention to in the process of home decoration construction in winter:

due to the low temperature in winter, the home decoration construction should be paid special attention to. Although the construction volume of room decoration is small, it includes conventional types of work such as water, wood, electricity, tile, oil, etc. due to the particularity of the season, the following details should be paid attention to in the process of home decoration construction in winter:

Yangtze floor Zexi solid wood floor Shude sliding door wardrobe

1. Prevent dryness

dryness cracks on the wall in winter are mainly caused by uneven water loss. Sticking kraft paper or bean wrapped cloth on the wall can play a certain preventive effect

2. Control temperature

the temperature is low in winter. If the plastering, puttying, tiling and other working surfaces are frozen, there will be quality problems such as hollowing. For the room without heating, when the temperature cannot meet the requirements, the construction shall be suspended or the heating equipment shall be increased to increase the indoor temperature. For the room that has been heated, a higher temperature is beneficial to the construction, but attention should be paid to the problem of drying and cracking caused by too fast water loss on the working surface. The sand used by bricklayers should be carefully screened and there should be no ice. Antifreeze should be added appropriately according to the actual construction needs. When mixing mortar, the temperature of water should not exceed 80 ℃, which should be adjusted frequently with use. Cement cannot be constructed in the open air, and antifreeze should be done well

3. Leave gaps

follow the principle of thermal expansion and cold contraction, and pay attention to leaving appropriate gaps in winter construction

a. the door seam should not be too small during winter construction, so as to prevent the door from tightening in summer and cannot be opened and closed freely

b. When laying solid wood floors, about 2mm expansion joints should be left around, otherwise it will cause bulging and hanging

c. when making furniture, it is necessary to leave about 0.1mm interface seam to avoid deformation

4. Transition temperature rise

whether wall tiles or floor tiles, materials should be moved from outdoor to indoor for transition for 24 hours, and can be paved only after adapting to indoor temperature

5. Construction temperature control

consider the impact of temperature on the environmental requirements of each process. Generally, the ambient temperature of paint application should not be lower than 5 degrees Celsius, and the ambient temperature of varnish application should not be lower than 8 degrees Celsius. The wall and top coating should be adjusted as much as possible. If the adjusted coating is not used up in the first day, it is best not to use it again in the next day. Because the indoor air is dry and the water loss is fast, the putty before oiling cannot be scraped too thick, otherwise it is easy to cause hollowing, cracking and wall inequality

6. Safety and cleaning

in cold and dry winter, strict attention should be paid to safety. Garbage should be cleaned at any time, combustibles such as sawdust and wood chips should be cleaned at any time, and items such as paint should be placed separately in ventilated places such as balconies

成都男科医院

北京耳鼻喉医院

苏州男科医院

徐州男科医院

Copyright © 2011 JIN SHI